© 2008 Hurst Corporation

HURST 'DL' SERIES LABEL REMOVING MACHINES

HURST patented 'DL' series pressure sensitive label delaminating machines provide a method for effectively removing labels from syringes, plastic bottles, and aluminum canisters.
Download the PDF brochure...

HURST 'DL' series machines employan extreme high initial tack pressure sensitive tape to instantly bond to the top printed surface layer of a pressure sensitive label. HURST delaminating tapes feature a 2 mil flood coated hot melt adhesive (PSTC test #1 rating: 90) on a tough polyester film carrier. All roll widths are available.

When applied to a 3-layer paper pressure sensitive label, HURST delaminating tape removes the top printed label layer leaving a thin skin of the labels middle pulp layer and the entire bottom adhesive layer. All residues are assimilated into the bottom adhesive layer of a secondary label (normally a slightly larger, wrap-around, overlapping label). No trace of the original label is evident after relabeling.

When applied to a 2-layer film type label (PVC or Mylar, etc.) HURST delaminating tape removes both the top printed layer and the bottom adhesive layer as an integral unit.

HURST 'DL' series label removing machine capabilities are dependent on several factors: surface coating of the top printed label layer, bonding properties of the middle pulp layer, and bottom layer adhesive properties.

HURST DL label removing machines are custom built to meet individual applications. DL machines are typically inexpensive and readily available.